Posts filed under ‘GPS’

How Engineers are Fighting Traffic

We have been asked NJIT to post this great and informative infrographic that they have produced.  As you may know 25% of road congestion is caused by traffic collisions. Autonomous cars are one of the many technologies that will hopefully lead to a reduction in collisions and congestion. The Google car is said to have only been involved in 11 accidents during the 1.7 million miles the cars have traveled.

As you can see, by 2050 70% of populace will drive 4 million vehicles through urban areas and this is just one of the reasons that it is critical for the congestion problems to be improved. The graphic also shows many of the ways that engineers are trying to overcome this national problem.

Road Congestion Relief: How Engineers are Fighting Traffic (Click on InfoGraphic for larger view)

Congested roadways are common problems that all drivers have to deal with. Whether commuting to work or enjoying a leisurely drive through the city, it is a problem that causes a great deal of stress and unnecessary frustration. However, while it is still a large problem, many engineers are dedicating their time and resources to identifying why this problem exists and what they can do to make the problem more manageable for drivers in everyday situations. By understanding the statistics that surround road congestion problems, both engineers and drivers will be that much closer to determining how a solution can be reached. To learn more about how engineers are helping relieve traffic congestion problems, checkout the infographic below created by the New Jersey Institute of Technology’s Masters in Civil Engineering Online degree program.

 

Road-Congestion-Relief-Infographic_final

May 28, 2015 at 1:21 pm 1 comment

Automation of Surveying Creates Disruption and Opportunities

Special Guest Blogger
Houston Neal
Director of Marketing
Software Advice

Surveying is going through a technological renaissance. The increased adoption of machine guidance systems has renewed the importance of the surveying trade. This technology calls for a highly-trained workforce, and surveyors are the most qualified for this job. But to get in on the action, surveyors need to learn to use this technology and re-brand themselves.

 

GPS Machine Control Has Replaced Traditional Staking

Unless you’ve been sleeping behind the wheel, you’ve likely heard of GPS machine control. Also referred to as machine guidance or automated machine control, these systems are widely used by heavy construction companies. They speed up work, improve grade accuracy and improve the billing and scheduling accuracy of jobs. For example, by calculating the amount of material moved in a day, they can substantiate bills or keep employees on schedule.

 

The premise behind the technology is simple: just like using GPS in your car, a GPS machine control system tells excavators where to drive equipment. Additionally, these systems indicate the grade to excavate at. Depending on which version is being used, machine control systems either provide instruction on where to position the blade or automatically do it for drivers.

 

GPS machine control systems replace surveyors’ old jobs – especially staking. Traditionally, machine operators relied on stakes for both position and grade information. With machine control, this information is relayed in real-time to a unit on the driver’s dashboard.

 

So if staking is no longer necessary, are surveyors still necessary? Absolutely. Historical roles like boundary resolution and topographic survey work cannot be automated, so surveyors will always be needed for these.  But they are also the best people to take on more modern duties, such as managing the GPS machine control system.

 

A Picture of the Modern Surveyor

To stay relevant on the job site, surveyors need to take ownership of three roles: they need to calibrate the site, prepare data for the machine control system, and provide quality control and assurance of the finished grade.

 

Before any construction begins on a job site, surveyors are needed to set up the geodetic control. This is a reference system used to determine GPS coordinates. After the geodetic control points have been determined, the base station can be set and the site can be calibrated.

 

The next step is to create the 3D model that will be used in the machine control system. This is a huge opportunity for surveyors. Preparing data for the machine control system can be difficult and many contractors don’t want the extra liability. So they either outsource or hire exclusively for this task; some even dedicate entire teams to data preparation.

 

To own this process, surveyors must first learn to work with paper plans and CAD files. 3D data models are made with both types of plans. Often surveyors have to clean up drawings before building the 3D model. So it’s essential that they are familiar with the various file formats, to understand how to use them, and to be able to build the models afterwards. Finally, these files will need to be converted into a machine-ready format and uploaded into the machine control system.

 

“Someone has to have their fingers on manipulating the design into a format that goes into the computers on the machine guidance systems,” explains Tom Taylor, Chief of Surveys Coordination and New Technologies For Caltrans District 4 Surveys. “The best people to do this are surveyors. It’s a niche that surveyors are in the best position to provide this service for.”

 

Once the site has been calibrated and the data has been uploaded into the machine control system, construction can begin. But the surveyors role doesn’t end here. They will be needed during construction to monitor the machine control and to deliver quality control and assurance. No one is more qualified to provide quality assurance of grades than the surveyors.

 

Training and Branding: the Keys to Unlocking Job Opportunities

To take advantage of these job opportunities, surveyors need to learn to use this technology and “re-brand” themselves. As mentioned above, they will need to learn how to work with CAD files, how to develop 3D models for machine control and how to transfer data into the machine control systems.

 

“Maintain your expertise in the technology,” suggests John Watson, President of the Texas Society of Professional Surveyors. “Surveyors have always been at the forefront of technology and they need to stay that way. Always be learning. Always be training on new equipment.”

 

They should also become familiar with the major machine control packages on the market from companies such as Caterpillar, Leica, Topcon, Trimble and GeoPac, the software used by many branches of the Department of Transportation (DOT). Surveyors can get training directly from these companies, or one of the many partners that resell these systems.

 

In addition to getting training, surveyors need to brand themselves as machine control experts. Contractors, land engineers and surveyors are all vying for this title and no one has proved themselves in the role yet. Land surveyors are the most qualified for the job, so they should position themselves accordingly. And to support this claim, they need only point to the existing state laws that require surveyors to be part of the machine control setup process.

 

Salient Points

     Surveyors have an opportunity to work in more professional roles that require more thought than swinging a hammer or pounding a stake

     To win more jobs, surveyors need to take ownership of the following tasks:

     Site calibration

     Data preparation

     Quality assurance and control

 

Promote your GPS Machine Control Services

If you are a land surveyor and want to promote your own services, join our free directory. A profile includes your company contact information, description of services and a link back to your website. For more information, contact Houston Neal (houston@softwareadvice.com).

 

This article originally appeared on Software Advice, a free online resource for heavy construction software. You can view the original article at: Automation of Surveying Creates Disruption and Opportunities.

civil engineering jobs :: civil engineering resumes :: civil engineering blog :: civil engineering discussion

March 7, 2011 at 10:02 am 1 comment


Enter your email address to follow this blog and receive notifications of new posts by email.

What’s Tweetin’…

Archives

Feeds


%d bloggers like this: